Optional Services: 

NICE Sliding Gate Motors in UAE

Nice RUN 2500 KG

Nice RUN 2500 KG Sliding Gate Motor in Dubai, Sharjah, Abu Dhabi, Ajman UAE.

Nice RUN2500 sliding gate automation kit, 2500 Kg, 18 m, 230 Vac.
The RUN 2500 kit is designed for the automation of gates with a maximum weight of 2500 Kg
that develops 1390 N maximum torque when accelerating with an absorbed power of 870W. 
Nice RUN 2500 has an electromechanical travel limiter, a temperature sensor that adapts
the engine power to the climatic conditions, at the same time adapting the thermal protection. 
The BlueBus system allows connections with only two wires between the control unit and up to 15 control, 
safety and signaling devices. The Nice FLO2R-S remote control has 4.5 million combinations, rolling code, 
self-learning function (possibility of entering codes remotely with an authorized transmitter
or through a programming key on the receiver) and sequential code for multiple entry.

Nice Run 2500 Kg:
Pinion: 18 teeth and 4 modules
Maximum torque: 50 Nm (1390 N)
Rated torque: 30 Nm (830 N)
Gate weight: 2500 Kg
Gate length: 18 m
Speed: 12m/min
Cycles/hour: 15
Maximum continuous operation time: 60 min
Durability: approximately 450,000 cycles
Power supply: 230V AC, 50Hz / 120Vac, 50-60Hz
Absorbed power: 870 W, 3.8 A
Insulation class: 1 (grounding is required)
2 outputs for light signals
BLUEBUS output
Radio connector
Programmable functions: 8
Operating temperature: -20°C - +50°C
Degree of protection: IP 44
Dimensions: 400 x 255 x 390 mm
Weight: 24.5 Kg

Photocells:
Technology: BlueBus
Range of action: 15 m
Operating temperature: -20°C - +50°C
Degree of protection: IP 44
Dimensions: 50 x 80 x 29 mm
Weight: 140 g
Flashing Light :
Flashing signal
For lamps with 21 W power
Power supply: 12 V
Frequency: DC or 50/60 Hz
Integrated antenna
Support for ABF antenna (not included)

Remote Control:
Frequency: 433.92 MHz
Number of channels: 2
Operating distance: 150/200 m with connected antenna in open spaces
Dimensions: 58 x 86 x 22 mm.

What’s Included:
1 x Run2500 Motor with electromechanical limit switch (230v).
1 x Rua2 Integrated control unit.
2 x ON2E Remotes.
1 x EPMB Pair of Bluebus Photocells.
1 x OXI Receiver.
1 x Blinker Light.
1 x Push button.